PANEVA · SMART PRIVACY FILM
A precut, prewired film kit for compatible interior glass. Switch from a clearer view to frosted privacy when you need it.
Measure first. Choose a fixed panel size in inches. Plan a dry installation and cable route.
Illustration. Clarity and privacy vary with lighting and angle.
01 / CHOOSE YOUR KIT
Choose by the width × height of the film panel, in inches. Measure your usable glass before ordering.
Kit and carton illustration. Components are shown below.
FedEx shipping and applicable tax appear before payment.
Prewired film, power unit and remote included
Fixed sizes; review fit and trimming limits
Made to order · 15 business days plus transit
Made to order · Full prepayment · 15 business days from payment confirmation, plus transit · Free cancellation within 48 hours. Terms and warranty ↗
INSPIRATION
Explore a few ideas, then return to the kit and check whether your glass is suitable.
Imagine a bright bathroom with an open view, then a softer, more sheltered space when you want privacy.
Bathroom placement needs a site review. Keep the film, its edges and wiring away from showers, splashes and condensation.
Illustrative lifestyle images, not photos of the Paneva kit installed or measured optical comparisons. Actual privacy and haze depend on lighting and viewing angle.
02 / WHAT ARRIVES
The selected film panel arrives rolled and protected. The power unit and accessories sit inside the protective core.
Wire connectors, electrical tape and compatible neutral oxime silicone are not included. Keep electrical connections insulated and dry.
Follow the connection guide labeled for your exact kit.
Illustrative packaging. Rigid carton approximately 11.8 × 11.8 in.; length about 20.8–50.8 in., according to film width.03 / PLAN YOUR INSTALLATION
Use flat, compatible interior glass. Confirm panel dimensions, edge clearance and the busbar position.
Control dust, clean the bare glass and plan a dry, accessible location for cables and power unit.
Work down the glass in small sections. Follow the supplied wiring guide; fixed electrical work needs a qualified professional.
EXPLORE THE FINISHES
White SE referenceClear referenceMove the slider or use the arrow keys. Illustrative appearance comparison. Images differ in framing and lighting; this is not a measured optical test.
Gray / Graphite referenceClear referenceMove the slider or use the arrow keys. The clear image is a shared visual reference, not a verified clear-state photograph of the gray film. Images differ in framing and lighting; this is not a measured optical test.
KNOW THE MATERIAL
Self-adhesive PDLC film for compatible existing interior glass. Power on for the clearer state; power off for frosted privacy. Dry application only.
The White SE figures below are supplier reference values, not independent tests or a promise of identical optical performance in every installation.
Light transmission is not the same as optical clarity. Residual haze and silhouettes vary with viewing angle and lighting. Follow the electrical label and instructions supplied with your exact kit.
04 / DELIVERY
Made to order in 15 business days from payment confirmation, plus transit. Kits ship from Florida. Enter your ZIP to check the delivery area; the FedEx cost is shown before payment.
Shipping details ↗Final FedEx charge and tax appear before payment.
BEFORE YOU ORDER
No. The clearer state can still show residual haze, especially from an angle or in certain lighting. Do not expect it to look identical to untreated glass.
No. Frosted film diffuses light and obscures the view. Strong backlighting or someone close to the glass can produce shadows or silhouettes. It is not blackout film.
Only after a location review. Do not install this DIY film inside a shower or where water, splashes or condensation can reach the film, its edges or its wiring. Edge sealing does not make the kit waterproof.
No. This is a dry installation. Do not use water or soapy application fluid between the film and the glass.
Turn the system off before cleaning. Use only a dry, soft, lint-free cloth. For a small spot, lightly dampen the cloth with 97% isopropyl alcohol. Never soak or spray the film. Keep the edges, busbars and electrical parts dry. Never use water, soap, bleach, ammonia, glass cleaner, blades, scrapers, cutters or any sharp object on the installed film.
You may trim the height only at the edge opposite the busbar, and the width by no more than 0.79 in. on each side. Keep tools away from the electrical area. Cutting is at your risk: a cut or damaged panel cannot be returned for a change of mind, and cutting-related damage is not covered by the limited warranty. Applied film cannot be reused.
It requires careful measuring, a clean working area, cable planning and patient application. Larger panels can need help. Follow the supplied instructions; fixed electrical work must be handled by a qualified professional.
The standard PDLC configuration returns to its frosted state without power. A compatible transformer is required for the clearer state.
Every kit is made to order with full payment upfront. Production is planned at 15 business days from payment confirmation, plus transit, including the wait for the next production lot. Review shipping and tax before paying.
Cancel for a full refund within 48 hours of ordering. After that, change-of-mind cancellation is not available. A three-year limited warranty covers defects under normal use; report arrival damage within 14 days. Read the full terms for exclusions and your rights.
